How To Blow Up A Pool Float Fast

Introduction

Summer is here, and it’s time to hit the pool! But before you can enjoy your time in the water, you need to inflate your pool float. Inflating a pool float can be a tedious task, but with the right techniques, you can do it fast and efficiently. In this article, we will show you how to blow up a pool float quickly, so you can spend more time enjoying the pool and less time inflating your float.

Choose The Right Pump

The first step to blowing up a pool float quickly is to choose the right pump. There are several types of pumps available, including manual pumps, electric pumps, and battery-operated pumps. Electric pumps are the fastest and most efficient, but they require an electrical outlet. Battery-operated pumps are also a good option, but they can be slower than electric pumps. Manual pumps are the slowest option, but they are also the most affordable.

Prep Your Float

Before you start inflating your pool float, make sure it’s prepped and ready to go. Remove any packaging or tags from the float, and check for any holes or leaks. If you find any holes or leaks, patch them up before inflating the float.

Start Inflating

Once your float is prepped, it’s time to start inflating. If you’re using an electric or battery-operated pump, attach the pump to the valve on the float and turn it on. If you’re using a manual pump, insert the pump nozzle into the valve and start pumping. Make sure to keep the nozzle in place and pump continuously until the float is fully inflated.

Use Your Body Weight

If you don’t have a pump, you can still inflate your pool float quickly by using your body weight. This method works best for smaller floats. First, open the valve on the float and hold it open with your fingers. Then, blow a large breath of air into the float and quickly close the valve with your fingers. Next, lay on the float with your body weight on top of it, and let the air from your breath distribute throughout the float. Repeat this process until the float is fully inflated.

Don’t Overinflate

It’s important not to overinflate your pool float, as this can cause it to burst or become unstable in the water. Follow the manufacturer’s instructions for the recommended level of inflation.

Check For Leaks

Once your pool float is fully inflated, it’s important to check for any leaks. Do this by spraying the float with soapy water and watching for bubbles. If you see any bubbles, mark the spot with a piece of tape and patch it up before using the float.

Store Your Float Properly

After you’re done using your pool float, make sure to store it properly. Deflate the float and fold it neatly, then store it in a cool, dry place. Avoid storing the float in direct sunlight or in a damp area, as this can cause damage to the float.

Conclusion

Inflating your pool float doesn’t have to be a tedious task. By following these tips, you can blow up your pool float quickly and efficiently, so you can spend more time enjoying the pool. Remember to choose the right pump, prep your float, and inflate it properly to avoid any issues. Happy swimming!