If your Skullcandy left earbud is not working, you have come up to the right identify. Considering this article is going to solve your problem within no fourth dimension.
Skullcandy earbuds can exist used in Mono manner. It means you can listen from only one earbud. In stereo way, you lot tin sync both earbuds and then pair them with a Bluetooth device.
Notwithstanding, one earbud fails to work sometimes. Whether your left or correct earbud is non working, the fixing method is the same. Read this commodity till the end to find the solution for this issue.
Make Skullcandy Left Earbud Work
This issue can exist solved past resetting your earbuds. In that location are ii reset methods explained below;
Reset Method 1
Follow these steps to troubleshoot your Skullcandy earbuds if the left 1 is non working;
- Put both earbuds in their charging case.
- Go to the Bluetooth settings on the device (e.k. phone, tablet, computer) to which your earbuds are paired.
- Turn OFF Bluetooth and remove your earbuds from the pairing list.
- Now, take out the left earbud from its case. Touch and concur the center of the earbud until the LED indicator flashes blood-red.
- This indicates that the earbud is reset. Now, put the left earbud back in its case.
- Next, have out the right earbud from the case and reset it by post-obit the aforementioned process.
- Now, put both earbuds in your ears. A beep tone and a voice prompt will inform you that both earbuds have synced with each other.
- At this point, turn on Bluetooth on your device (telephone, tablet, PC). Your Skullcandy earbuds volition evidence on the screen of your device.
- Connect them with your device. Hopefully, the sound is coming from both earbuds.
Reset Method
2
If the get-go solution does not work and nevertheless your Skullcandy left earbud is not working and then follow this solution;
Plow OFF Bluetooth on the device to which your earbuds are continued. Besides, remove the earbuds from the pairing listing.
- Turn off both earbuds, press, and hold the back button/bear on panel for 6 seconds until the earbuds ability off.
- At present, press and hold the back button on your left earbud for 10 seconds. Put it in the charging case.
- Repeat the same process with the correct earbud also.
- Now, remove both earbuds from the charging example and they will get into pairing way.
- Turn on Bluetooth on your device-phone, tablet, PC- and scan for your Skullcandy earbuds.
- Connect them when their name appears in the list. Make sure the audio is coming from both earbuds.
Solution 3: Make clean the Earbuds
Dirt, debris, or earwax traps within the earbuds and they can stop working. Therefore, you should regularly clean your earbuds.
Take a toothpick and gently insert it into the holes on your earbud. Remove any debris, lint, or earwax. Further, clean the speaker grill using a soft and new toothbrush.
Suck the earbud to remove the earwax completely. This trick was establish helpful by many users.
Solution 4: Accuse the Earbud Properly
Sometimes, the user does not observe that the earbuds are not charging properly. Maybe the charging indicate of your left Skullcandy earbud is lacking.
Therefore, it is not receiving power. An effective fob is to place the left earbud in the location of the correct one for some time to look if it charges or not.
Moreover, clean the contact points in the charging case to ensure proper charging. Go out the earbud for fifteen-thirty minutes in the case and then check once again.
Related:
Pair Skullcandy Jib Wireless Earbuds
FAQs
While using your Skullcandy earbuds, certain questions may come to your mind frequently. You will notice the answers to your common queries hither;
Why should I accept out the left Skullcandy earbud first from the charging case?
It is recommended to piece of work with the left earbud first and remove it from the charging case before the right earbud. The reason is that the right earbud starts the pairing procedure.
And so, removing information technology from the case will create a problem and information technology will non sync with the left earbud. Hence, the left earbud will not receive audio signals.
Can I supersede a lost Skullcandy earbud?
Unfortunately, Skullcandy does not allow to supervene upon the lost earbud. You lot have to purchase a new pair of earbuds if one of your previous earbuds has been lost. However, you lot can withal apply a single earbud if you are good with it.
Are Skullcandy earbuds truly waterproof?
Skullcandy earbuds characteristic IPX4 waterproof rating. They are not fully waterproof merely but sweat-resistant. It ways they will be spoiled if put in h2o. Hence, you should not put them into wet ears or while taking a shower.
Troubleshooting Skullcandy Wireless Earbuds – Video Guide
Final Words
The upshot under consideration tin exist solved readily by reading this guide. Follow each step in the correct order to fix your Skullcandy left earbud not working. We promise, you lot are liking our articles.
