Roomba Something Went Wrong – Troubleshooting Guide In 2023

Introduction

Roomba is a popular brand of robotic vacuum cleaner that has revolutionized the way people clean their homes. However, even the best technology can sometimes experience problems. One of the most common issues with Roomba is the “something went wrong” error message. In this article, we will discuss the possible causes of this error and provide some troubleshooting tips to help you resolve the issue.

What Causes the “Something Went Wrong” Error?

There are several possible causes of the “something went wrong” error message on your Roomba. Some of the most common causes include:

1. Dirty Sensors

If your Roomba’s sensors are dirty, it may not be able to navigate your home properly. This can cause it to get stuck or experience other issues. To fix this issue, you can try cleaning the sensors with a soft cloth.

2. Low Battery

If your Roomba’s battery is low, it may not be able to complete its cleaning cycle. To resolve this issue, you should charge your Roomba fully before using it.

3. Obstacles in the Path

If there are obstacles in the path of your Roomba, it may not be able to navigate around them. This can cause it to get stuck or experience other issues. To fix this issue, you should remove any obstacles from the path of your Roomba.

4. Software Issues

If there are software issues with your Roomba, it may not be able to function properly. To resolve this issue, you can try resetting your Roomba or updating its software.

Troubleshooting Tips

If you are experiencing the “something went wrong” error message on your Roomba, here are some troubleshooting tips to help you resolve the issue:

1. Clean the Sensors

To clean the sensors on your Roomba, you should use a soft cloth. Gently wipe the sensors to remove any dirt or debris that may be blocking them.

2. Charge Your Roomba Fully

To ensure that your Roomba has enough power to complete its cleaning cycle, you should charge it fully before using it.

3. Remove Obstacles from the Path

If there are obstacles in the path of your Roomba, you should remove them to ensure that your Roomba can navigate around them.

4. Reset Your Roomba

To reset your Roomba, you should press and hold the Clean button for 10 seconds. This will reset your Roomba to its factory settings.

5. Update Your Roomba’s Software

To update your Roomba’s software, you should connect it to the internet and download the latest software update.

Conclusion

The “something went wrong” error message on your Roomba can be frustrating, but there are several possible causes and troubleshooting tips that can help you resolve the issue. By following the tips outlined in this article, you can ensure that your Roomba is functioning properly and keep your home clean and tidy.