Roku Tv Stuck On Roku Screen

The TCL Roku Boob tube is one of the near popular smart TVs on the market today, but unfortunately, it has also been known to take problems with the operating system. If your Telly’s OS becomes corrupted, your TCL Roku TV may become stuck on a blank or TCL logo screen.

In this commodity, I’ll testify you how to get your TCL Roku Television receiver working once again, even if it’s been stuck on the logo screen for several hours or even days.

Why does my TCL Roku Tv stuck on Logo Screen?

Ane possibility is that in that location is a problem with the Tv set’s firmware. You will have to deal with this consequence if the firmware is outdated. Some other possibility is a problem with the Boob tube’s HDMI connexion. The Idiot box may become stuck on the logo screen if the HDMI connectedness is damaged or loose. This problem may too be acquired by factors like a motherboard error or hardware or system problems.

However, these are the primary reasons your TCL Roku Tv may stuck on the loading or startup screen.

• An outdated software version.
• A corrupted memory bill of fare.
• Damaged HDMI connectedness.
• A malfunctioning primary board.
• Overheating.

How to gear up a TCL Roku Tv that is stuck on the logo screen.

In brusque:
To troubleshoot your TCL TV if it’s stuck on the logo screen, get-go unplug it from the power outlet and then plug it back in. If that doesn’t piece of work, endeavour resetting the Idiot box. To do this, printing and hold the reset button on the dorsum of the TV for 30 seconds. After a factory reset, your problem should be fixed.

Before diving into a detailed solution, delight accept a look at the bellow table for a better understanding of this problem.

Footstep ane: Power Cycle Your TV

Information technology may appear to be simple. However, unplugging your Boob tube from the wall socket is the most typical way to become it to plow dorsum on. Afterwards unplugging, wait at least sixty seconds.

Wait patiently until at to the lowest degree a minute before plugging it back in. While the TV is unplugged, locate the power button and press it for at least 30 seconds.

Make sure
you’re pressing the ability push button on your Idiot box rather than the remote!

This volition help to drain whatever remaining ability from the Goggle box and let it to soft reset. This isn’t the same equally only turning the TV on and off! Later on 60 seconds, plug the TV dorsum in, and it should ability on without a glitch.

Related:
Six means you lot are shortening the life of your Television set

Step two: Perform a Factory Reset

If unplugging and re-plugging your TV doesn’t fix your trouble and it is still stuck on the logo screen, you must reset it to its manufacturing plant setting.

Call back that
resetting your TV to its factory settings will erase everything, including your information and settings.

However, to reset your TCL TV,

• First, remove all the cables on your TCL Roku Boob tube, excluding the power cord.
• And then plough on your TV.
• Afterwards then check your Tv’south lower function or dorsum for the reset push.
• Once you lot locate it, take a brawl pen and press and hold the reset button for at least 12 seconds.

The Television will turn off so plough on automatically. Once the startup screen comes up, release the reset push button. I hope that, after a hard reset your Tv set’s problem will be fixed.

Step iii: Check for Firmware Updates

As previously mentioned, if your Tv’s firmware is outdated or corrupted, it might go stuck on the logo screen. The software that keeps a device similar a Tv running is known equally firmware. Like other TVs, TCL Roku TVs must have the most recent firmware to function correctly.

TCL releases new monthly updates to amend its system’s performance and eliminate various minor bugs. If yous update your TV, there is a chance that your trouble may be fixed. To practise that,

✔

Kickoff, download the latest firmware version from the TCL website. (Exist certain to cull the correct model number for your Television set)

✔

Right-click the downloaded firmware file, then select “Send To,” “Extract” (or “Zip”), and the extraction plan loads onto the screen.

✔
Connect a USB drive to your reckoner and copy the downloaded firmware file to the drive.

✔
Click “Start,” “(My) Computer,” then right-click the removable device icon and select “Eject.” (Disconnect the USB flash drive from the USB port on the figurer in one case the icon disappears.)

✔
Power downwardly the TCL Roku LCD TV, plug the USB flash drive into the USB port on the Television set and so power the TV on.

The device volition automatically discover the inserted USB flash bulldoze and begin to upload the data onto the Tv. One time complete, a prompt appears on the screen, telling you to remove the flash drive from your estimator system.

Related:
Don’t exercise this Things to your Goggle box, you will regret information technology Later!

TCL Roku Tv set stuck on boot screen. How to Set up?

If your TCl Roku Television is stuck on the boot screen, it may exist acquired by a software upshot. To fix this, you lot can try resetting the device past pressing and belongings the reset button on the dorsum or side of the device for 10-15 seconds.

You can also try unplugging the device from the power source for a few minutes and and so plugging it back in. If these steps do non piece of work, you may need to USB Firmware update your Tv set. However, if your TV is covered with valid warranty, contact TCL support for aid.

FAQs

Q. Aught worked. What to do?

Unfortunately, suppose none of those mentioned above methods work and your Tv is nevertheless stuck on the startup screen. In that case, your Telly may be damaged, or your Idiot box’south internal component may be broken.

In this example, visit your nearest electronics repair shop or telephone call an experienced repairer and enquire him to look into it. You can also contact TCL customer care and talk over your situation with them about your issue. Merely to get free service, your Boob tube must accept a valid warranty.