Quest 2 With Full Body Tracking
No outside sensors needed.
Wireless tracker even at this price signal.
HaritoraX Expansion gear up for elbow tracking
HaritoraX Expansion set for hip tracking
HaritoraX 1.1 is an inexpensive, space-saving wireless total-body tracking device that requires no additional equipment. When combined with a VR headset such as Meta Quest two or HTC Vive, the avatar's unabridged trunk can be moved in the Metaverse in sync with its body motions in the existent world.
By wearing a VR headset, controllers, HaritoraX 1.1, and expansion sets, you tin sync your motions more naturally for your avatar in the VR Metaverse.*
* Windows PC necessary.
* The maximum number of tracking points supported by each metaverse platform differs.
Pre-order nowAbout HaritoraX Expansion set for elbow trackingAbout HaritoraX Expansion set for hip trackingOnline manual日本語
Must-have "Total Body Tracking"
to control your avatar as you wish.
Having your hands full with VR goggles and a controller yous tin't even get your avatar to sit on the ground or in a chair. You lot cannot express cuteness by sitting like a kawaii daughter, nor can you strike a pose with your legs crossed.
When you dive into VR social networking sites yous run into a lot of beautiful and cool avatars doing all kinds of movements. With HaritoraX, you get to express a wide range of movement.
*All screenshots on this page are taken using HaritoraX.
Product Specification
Approx. 10 hours with born Li-ion battery
*It tin can also exist used while powered by a power bank.
Approx. 4.five hours with USB Type-C charging port
*When charging while the hardware is in off way.
Within 10 meters (Approx. 32.8 feet)
Diverse headsets compatible with SteamVR
*Not guaranteed to piece of work with all headsets.
Performance-confirmed VR Headsets
Oculus Quest, Quest2, Rift Southward, VIVE(1st gen), VIVE Pro, Fujitsu FMVHDS1, Valve alphabetize, HP ReverbG2, PICO iv, Quest Pro
VRChat, NeosVR, VirtualCast, Virtual Motion Capture, cluster, ChilloutVR
*It besides works with a multifariousness of applications other than listed above.
Breast:60-120cm (23.half dozen-47.ii inch), girth of the above knee:xxx-70cm (11.viii-27.five inch), girth of the nether knee:xxx-70cm (11.viii-27.5 inch)
*Tightening becomes tighter around the upper limit.
*The upper limit can be further extended with an optional extension belt.
Windows10 21H1 or subsequently / SteamVR ane.17 or after
HaritoraX chief unit, HaritoraX subunit (higher up human knee) x 2, HaritoraX sub unit (nether knee joint) x 2, Connection cable x 4, HaritoraX accommodate, USB cable, Documents (Safety Guide / Warranty)
TP-Link: UB400, UB4A
ASUS: USB-BT400
ZEXMTE: 0054
Avantree: BTDG-40S-BLK
Plugable: USB-BT4LE
Expansion set up
What is 11-point tracking?
In improver to the three tracking points on the VR headset (caput) and controllers (right and left easily), HaritoraX adds 5 tracking points* for a total of 8 tracking points.
In add-on, 2 additional tracking points will be achieved with the newly announced HaritoraX elbow tracking expansion gear up (right and left elbows) and 1 additional tracking point with the HaritoraX hip tracking expansion ready (abdomen), for a full of xi tracking points.
11-point tracking can reproduce the motions of the human body in the real world in its entirety in the VR metaverse and is considered an optimal environment for users who enjoy physical motions such as dancing in the VR metaverse.
* With the release of the expansion set for elbow tracking, the Haritora Configurator will exist updated to increase the number of tracking points in the VR Metaverse applications such as VRChat from three to 5 when used with HaritoraX alone.
What is elbow tracking?
The avatar'southward elbow motions are reproduced past estimating the position of the elbow joints from the position of the palms, even if only a VR headset and 2 hand controllers are used.
In reality, if y'all rotate your wrist or motility your elbow while holding your wrist steady with the VR headset and controllers, their motions don't sync well with avatars in the VR Metaverse.
The HaritoraX elbow tracking extension gear up allows for more accurate elbow motility.
HaritoraX / HaritoraX one.1 Expansion prepare for elbow tracking specification
HaritoraX(SVP-MC1S) / HaritoraX 1.one(SVP-MC2S)
Girth of the upper arm:20cm～52cm (7.nine-20.5 inch)
*The pressure level becomes tighter around the upper limit.
HaritoraX one.i sub unit A, HaritoraX 1.1 sub unit C, Connection cable x 2, Shoulder harness, Documents (Safety Guide / Warranty)
What is hip tracking?
HaritoraX had previously used 5 IMUs to generate 3 tracking points in the VR Metaverse, but due to the poor usability of wearing vi IMUs on the torso and the advanced posture estimation and correction capabilities of the Haritora Configurator, 5 IMUs were sufficient. The organisation was designed to use 5 IMUs, which would have been sufficient.
However, the apply of vi IMUs enables accurate tracking, even in special postures where the avatar would move differently from reality with 5IMUs.
In improver, the phenomenon usually referred to as "feet sliding" in which the avatar'due south feet slide on the floor, is greatly reduced.
HaritoraX / HaritoraX 1.1 Expansion set for hip tracking specification
HaritoraX(SVP-MC1S) / HaritoraX i.1(SVP-MC2S)
Chest:60-120cm (23.6-47.two inch)
*The pressure becomes tighter around the upper limit.
*The upper limit can be further extended with an optional extension belt.
HaritoraX one.1 sub unit D, Connection cable, Hip belt, Documents (Safety Guide / Warranty)
*Each expansion set reduces the operating time of the HaritoraX's internal battery past approximately 15% (If both are used, information technology is thirty%).
Source: https://en.shiftall.net/products/haritorax
