Irobot Roomba Error 19: Causes And Solutions

Introduction

iRobot Roomba is one of the most popular robotic vacuum cleaners in the market. It is designed to clean floors and carpets without any human intervention. However, like any other electronic device, the Roomba may encounter errors during operation. One of the most common errors is error 19, which indicates that the Roomba has encountered an obstacle.

What is Error 19?

Error 19 is a common error code that appears on the iRobot Roomba display screen. It indicates that the Roomba has encountered an obstacle, such as furniture or other objects, and cannot continue with its cleaning cycle. When the Roomba encounters an obstacle, it stops and emits a series of beeps. The Roomba’s display screen then shows the error code 19.

Causes of Error 19

There are several causes of error 19 on the iRobot Roomba. One of the most common causes is an obstacle in the Roomba’s path. This can be anything from furniture to toys to cords. Another cause of error 19 is a dirty or clogged sensor. The Roomba’s sensors are designed to detect obstacles, and if they are dirty or clogged, they may not work properly. A faulty or damaged sensor can also cause error 19.

Solutions for Error 19

If your iRobot Roomba encounters error 19, there are several solutions you can try. First, check for any obstacles in the Roomba’s path and remove them if possible. If the Roomba’s sensors are dirty, clean them with a soft cloth. If the sensors are clogged, use a can of compressed air to blow out any dust or debris. If the Roomba’s sensors are faulty or damaged, you may need to replace them.

Removing Obstacles

To remove any obstacles in the Roomba’s path, first turn off the Roomba and unplug it from the charger. Then, carefully lift the Roomba and turn it over. Check the wheels and brushes for any tangled hair or debris. If there is any debris, carefully remove it with your hands or a brush. Check the sensors on the bottom of the Roomba for any dirt or debris and clean them with a soft cloth.

Cleaning Sensors

To clean the sensors on the Roomba, first turn off the Roomba and unplug it from the charger. Then, use a soft cloth to wipe the sensors clean. Be careful not to damage the sensors while cleaning them. If the sensors are clogged, use a can of compressed air to blow out any dust or debris.

Replacing Sensors

If the Roomba’s sensors are faulty or damaged, you may need to replace them. To do this, first turn off the Roomba and unplug it from the charger. Then, remove the battery cover and the battery. Locate the sensors on the bottom of the Roomba and disconnect them from the Roomba’s circuit board. Install the new sensors and reassemble the Roomba.

Conclusion

In conclusion, error 19 on the iRobot Roomba can be caused by several factors, including obstacles, dirty or clogged sensors, and faulty or damaged sensors. If your Roomba encounters error 19, try removing any obstacles in its path, cleaning the sensors, or replacing the faulty sensors. With these solutions, your Roomba should be back to cleaning your floors and carpets in no time!