If your Roomba is always telling you that its bin is total, so it is probable that one of its sensors is dingy.
Over time, dust can build upward and “blind” the sensor. This can lead to a situation where the sensor
thinks
that the bin is full even though information technology is completely empty.
As you’re probably already aware, this can be incredibly frustrating.
Make clean the 2 sensors on your Roomba’s bin.
You might not realize this, but there are two sensors on the door of your Roomba’southward bin.
If dust manages to build upward on these 2 sensors, the red thrash icon may stick effectually.
In the photograph in a higher place, we have circled the ii sensors in cherry.
This bin is from a Roomba 896. Depending on the model, the bin on your Roomba might look slightly different. However, the sensors are usually in the aforementioned place.
If your Roomba has a ruby-red “full bin” light that won’t get away, then your outset port of phone call should exist to clean these 2 sensors using a textile.
Any dry out cloth will do. It does non need to be microfibre.
Make sure that you give them a proper cleaning. The primary goal here is to get them to look black and shiny once again.
Once you accept washed that, slot the bin dorsum into your Roomba and effort once again.
If the bin light is still on, so you will demand to clean the sensors on the inside of the Roomba and make sure that the inlet is articulate of debris.
If the bin light is nevertheless on, then information technology is probably because ane of the sensors
on
the Roomba itself is dusty. That or clumps of grit and dirt have become embedded in the vacuum inlet.
The bluish pointer is pointing towards the vacuum inlet. The sensors look similar two black rectangles.
In the photograph above, you tin meet that we accept circled 2 sensors in red. Make sure that yous clean both of these until they are shiny again.
At this stage, you should also make certain that the vacuum inlet hasn’t go clogged with hair and dust bunnies.
On more than one occasion, I have had to put my paw in at that place and remove large clumps of dust. This seems to happen when long hair becomes stuck in the inlet and begins to collect dirt.
Once you take cleaned the 2 sensors and made certain that the inlet is clear of debris, yous can slot the bin back in once again and try again.
It’due south all the same not working.
If the steps above practise non work, then you should change the filter on your bin. Sometimes, so much dust tin build up on the inside of the filter that it’s nearly impossible to get rid of it all.
You should also repeat all of the steps to a higher place, just to make sure that yous didn’t miss a piece of clay.
Unfortunately, if you have done all of the in a higher place and the bin indicator is notwithstanding blood-red, so yous might need to contact Roomba support. In this case, information technology may be due to a faulty sensor or another technical issue.
Clean your Roomba every couple of weeks.
It is generally a good idea to requite your Roomba a adept clean every few weeks. That way, you can avoid issues like this in the future.
Think of it similar a regular motorcar service. This is a machine that vacuums your firm on a daily basis. Depending on the size of your domicile, it volition probably spend iii or four hours each week traversing over carpets and dirt and sucking up dust and hair.
Therefore, you lot should try to take good care of it.
