Introduction
Popsockets have become an essential phone accessory in recent years. They make it easier to grip your phone, take selfies, and watch videos hands-free. However, sometimes the adhesive that attaches the popsocket to your phone can fail, causing it to come off the base. In this article, we will discuss how to fix a popsocket that came off the base.
Why Do Popsockets Come Off?
Popsockets are attached to the phone using strong adhesive. However, they can still come off due to various reasons. These include exposure to heat, moisture, or pressure. Using a low-quality popsocket or attaching it to a rough surface can also cause it to come off.
Tools You Will Need
To fix your popsocket, you will need the following tools:
- A toothpick or a small pin
- A cotton swab
- A cleaning solution like rubbing alcohol or nail polish remover
- A hairdryer (optional)
Steps To Fix A Popsocket That Came Off The Base
Follow these steps to fix a popsocket that came off the base:
Step 1: Remove The Popsocket
If your popsocket has come off the base, the first step is to remove it from the phone. Use a toothpick or a small pin to lift the edge of the popsocket. Be careful not to scratch your phone. Once you have lifted the edge, gently pull the popsocket away from the phone.
Step 2: Clean The Surface
Once you have removed the popsocket, use a cotton swab dipped in rubbing alcohol or nail polish remover to clean the surface. Make sure there is no residue left on the surface. This will ensure that the new adhesive will stick properly.
Step 3: Dry The Surface
Use a clean cotton swab to dry the surface. Make sure there is no moisture left on the surface before you attach the new adhesive.
Step 4: Apply The New Adhesive
Peel off the backing from the new adhesive and apply it to the base of the popsocket. Make sure the adhesive covers the entire base. Press the popsocket firmly onto the phone.
Step 5: Wait For The Adhesive To Set
Once you have attached the popsocket, wait for at least 30 minutes for the adhesive to set. Do not use your phone during this time.
Step 6: Use A Hairdryer (Optional)
If you want to speed up the adhesive setting process, you can use a hairdryer. Set the hairdryer to low heat and hold it about 6 inches away from the popsocket. Move it around for a few minutes to help the adhesive set.
Conclusion
Fixing a popsocket that came off the base is a simple process. By following the steps outlined above, you can easily reattach your popsocket and get back to using your phone comfortably. Remember to use high-quality popsockets and attach them to clean, smooth surfaces to prevent them from coming off in the future.