How To Factory Reset Linksys Velop

Wondering how to reset Linksys Velop? Search no farther, because you’ve just come up across the ultimate guide.

By the finish of this post, you lot volition know how to reset your Linksys Velop easily with parent nodes also every bit all kid nodes.

To reset your Linksys Velop, locate the parent node and hold down the reset button at the bottom of the device for 30 seconds. Once washed, perform the same action to all child nodes in the household of your Linksys Velop system.

Now, let’due south review more than closely how to reset your Linksys Velop in a stride-by-step tutorial.

How To Manufactory Reset Linksys Velop?

Resetting your Linksys Velop system is pretty easy. The only thing y'all should do is perform the reset on all of the devices within the Velop organization.

Keep in mind that once the parent node in your Velop arrangement is reset,
all child nodes volition automatically be asunder.

Notation: Child notes can either be reset as well or reconnected once the parent node has finished the reset.

Important:
Before moving on to the upcoming steps on how to factory reset your Linksys Velop, annotation that your device must be actively running.

Y'all will know that your nodes are active if their LED boots up showing a imperial or a blue light.

Now permit’due south meet how to reset Linksys Velop:

Step #one Set up Your Devices

Resetting your Linksys Velop volition
erase all settings and configurations
fabricated to your system.

Such are WiFi names, passwords, security types, and all temporal configurations fabricated will be deleted.

Is My Device Eligible For A Reset?

If you’ve recently restarted or power cycled any of the nodes in your Linksys Velop system, the reset won’t work for a couple of minutes afterward.

Your nodes must accept been actively running for a couple of minutes in gild for the reset to piece of work.

Before interacting with any of the nodes, double-check that the LED is either in
purple
or
blue light.

Any other light might indicate an ongoing procedure and the factory reset button will not piece of work.

Step #2 Reset The Parent Node

As you lot probably know already, in your Linksys Velop system, at that place is a
parent node
and
child nodes.

The parent node is usually a single device and all child nodes will be connected and controlled remotely from the parent node.

In social club to reset the whole system, you must outset initiate the factory reset by resetting your
parent node.

Which Is The Parent Node?

The parent node can be distinguished from the child notes due to its
concrete connexion with the modem.

Y'all will know which node is the parent one if it is connected with your network modem via an
Ethernet cable.

Follow these steps to reset the parent node in your Linksys Velop organization:

1. Double-check that your parent node is in
   purple
   or
   blue lite.
2. Turn the device
   upside downward.
3. Locate the
   factory reset button
   in the bottom panel of the device.
4. Printing the mill reset button and concur it downward for
   30 seconds.
5. Release the push in one case the LED on your parent node starts slowly flashing.

Afterward releasing the mill reset push button, place your device in the correct position and wait for it to restart.

After the restart has concluded, all child nodes
will be asunder
from the parent node.

Step #3 Reset All Kid Nodes

After resetting your parent node, now all child notes are idle since they have been disconnected from the network.

To finish the reset, you lot must perform the same procedure as you did on your parent node, simply with all the child notes in your system.

Which Nodes Are Child Nodes?

The child nodes in your Linksys Velop organisation will ordinarily
not have whatever cables attached to them
except the ability adapters.

Yous will be able to tell which nodes are kid nodes past their smaller and compact size, compared to the parent one.

Perform the following steps in club to reset the child nodes in your Linksys Velop organisation:

1. Locate the
   factory reset button
   in the
   bottom panel
   of the child nodes.
2. Press the factory reset button on each kid node for
   thirty seconds.
3. Release the button in one case the
   LED’s calorie-free changes
   and the device reboots.

After the reset, yous’ll most likely need a guide on how to hook upward and set up all nodes so we got you covered!

In the adjacent part of the mail, nosotros’ll be discussing the setup you need to perform afterwards the reset.

How To Reconnect Child Notes In Linksys Velop System Afterward Reset?

Now that you lot know how to reset Linksys Velop to mill settings, you’re probably wondering how exactly to connect the devices back.

For this purpose, y'all will need the
Linksys mobile app
which you already have installed on your phone.

Note:
Before working with the Linksys app, make sure that information technology is updated to the
latest firmware
version.

Otherwise, it could run unstable and it may non piece of work with your telephone.

Follow these steps

to bank check the status of your Linksys Velop arrangement and the nodes:

1. Open the
   Linksys app
   on your mobile phone.
2. Click on
   Launch Setup
   at the bottom.
3. Choose
   Allow, when the app asks y'all for permission.
4. Agree
   to the
   Terms of Service.
5. When the app asks you what type of router you’re using,
   select Velop.
6. If ALL cables are connected properly simply clicking
   Side by side, the connexion will be set up.

Log In Role:

1. Log in to your business relationship.
2. Gear up WiFi
   name
   and
   password.
3. Choose a proper name for the node and label the room.
4. Yous’re done!

Notation: You tin can set up other nodes in your household, post-obit the same steps for each.

Read Adjacent:
Why is Linksys Router Speed Slower than Modem?

Lesser Line:

To reset your Linksys Velop, you must beginning reset the parent node and all kid nodes later. To reset, hold the factory reset button at the bottom of each node device for xxx seconds and reconnect them using the Linksys app later.

Now that you know how to reset Linksys Velop easily, nosotros hope that y'all volition accept no trouble connecting your device once the reset is done.

If you’re experiencing trouble during the reset or issues when reconnecting the devices later, you tin can always turn out for assistance from Linksys official client support.

We hope that this post was helpful for you to reset the Linksys Velop, and if you’re experiencing any other bug with your setup y'all can check our technical blog for a solution.